Thonic inspection hatches
Thonic inspection hatches come in several different designs and can also be customised based on bespoke dimensions, optional colours and additional accessories such as hinges and locks. The hatches have a high finish both in terms of fit and surface treatment. In addition you get the fastest installation on the market!
All Thonic inspection hatches are manufactured using the well-proven MDF board – a durable and environmentally friendly sheet material. Moreover, the fact that we strive to use environmentally friendly paints and raw materials in our manufacturing process makes the hatch feel right to use for several reasons.
Thonic tc-ue surface mounted
Surface mounted inspection hatchThonic tc-ue is a traditional inspection hatch fitted with a surface mounted frame. Installation is very quick as the fastening plates are pre-fitted and knocked out with a hammer behind the first drywall board or between the drywall boards when installed in double drywall. The hatch comes in standard sizes from 150 x 150 to 600 x 600 mm. Thonic tc-ue is delivered white painted, NCS S 0502-Y. For sizes up to 300 x 300 mm, the hatch has a self-fixing lock. For sizes larger than 300 x 300 mm, the hatch is fitted with a countersunk drive lock. Thonic tc-ue can be customised with other dimensions, in any colour or with optional accessories such as a range of hinges, lock models, etc.
Go to the product page »
Thonic tc-ue surface mounted press lock
Surface-mounted inspection hatch with press lockThonic tc-ue press lock is a traditional inspection hatch fitted with a surface mounted frame. Installation is very quick as the fastening plates are pre-fitted and knocked out with a hammer behind the first drywall board,or between the drywall boards when installed in double drywall. The hatch comes in standard sizes from 150 x 150 to 600 x 600 mm. Thonic tc-ue press lock is delivered white painted, NCS S 0502-Y. The hatch has the tc-gj hinge and a press lock that opens and closes the hatch when you press the hatch panel. Thonic tc-tk press lock can be ordered to size in a range of dimensions and the colour of your choice.
Go to the product page »
Thonic tc-id recessed
Recessed inspection hatchThonic tc-id is an inspection hatch for recessed and visually restricted assembly. The hatch is screwed in place with a drywall screw into the rear flange, and the joints and screw holes are then rendered. The hatch must be fitted before painting and comes in standard sizes from 150 x 150 to 600 x 600 mm and in versions for single and double drywall boards. Thonic tc-id is delivered unpainted. For sizes up to 300 x 300 mm, the hatch has a self-fixing lock. For sizes larger than 300 x 300 mm, the hatch is fitted with a countersunk drive lock. Thonic tc-ue can be ordered to size with alternative dimensions, in any colour or with optional accessories such as a range of hinges, lock models, etc.
Go to the product page »
Thonic tc-bd model EI30 och EI60
Fire-classed inspection hatchType-approved for EI30 and EI60
Thonic tc-bd is a fire-classed type-approved inspection hatch fitted with a surface mounted frame. Installation is very quick as the fastening plates are pre-fitted and knocked out with hammer between the first and second drywall boards. The hatch comes in standard sizes from 150 x 150 to 600 x 600 mm and is delivered white painted, NCS S 0502-Y. The hatch is fitted with a countersunk drive lock and can be customised with other dimensions, in any colour or with optional accessories such as a range of hinges, lock models, etc. The type approvals in question are no. 0118/04 (EI30) and no. 0117/04 (EI60).
Go to the product page »
Thonic tc-rd round
Round inspection hatchThonic tc-rd is a round inspection hatch fitted with a surface mounted frame. Installation is very quick as the fastening plates are pre-fitted and knocked out with a hammer behind the first drywall board or between the drywall boards when installed in double drywall. The hatch comes in standard sizes from Ø 150 to Ø 400 mm and is delivered white painted, NCS S 0502-Y. It is also fitted with a quick snapping lock. Thonic tc-rd can be customised with a recessed design using alternative dimensions, in any colour or with optional accessories such as a range of different lock models, etc.
Go to the product page »
Thonic tc-vm wet room
Inspection hatch for wet roomsThonic tc-vm is an inspection hatch for wet spaces fitted with a surface mounted frame. Installation is very quick as the fastening plates are pre-fitted and knocked out with a hammer behind the first drywall board or between the drywall boards when installed in double drywall. The hatch comes in standard sizes from 150 x 150 to 400 x 400 mm and is delivered white painted, NCS S 0502-Y. It is also fitted with a countersunk drive lock. Thonic tc-vm can be customised with other dimensions, in any colour or with optional accessories such as a range of hinges, lock models, etc.
Go to the product page »
Thonic tc-sl special
Customised inspection hatchesThonic Special is an inspection hatch that can be customised to any shape or colour you choose and include accessories of your choice. All Thonic inspection hatches are made from MDF. This makes the hatches particularly suitable for harsh conditions. The inspection hatch can be fitted flush with the wall or surface-mounted and include any of the various locks or accessories. Our flexibility allows us to produce hatches in most formats and colours. The hatches all have a high-quality fit and finish.
Read more here »
